Sprinkler System

Sometimes, watering your lawn the manual way is a bit too tedious. If you have to cover a fairly big area, then installing sprinkler systems is highly recommended. But before you do that, it’s best for you to know what your options are. The right one for you is the one that is just right for the size of your lawn.

Each sprinkler system type and size requires proper care and maintenance. Aside from installing it right, you should also know how to repair the sprinkler system in case it stops working for some reason.

Type of Sprinkler Systems

There are different types of sprinkler systems and the list below shows you your options. Choose the right system for your lawn for optimum coverage and hassle-free operation. Your sprinkler system choices include:

1. Impact Head Sprinklers

Impact head sprinklers are usually installed at golf courses. They deliver a stream of water over the lawn. It’s possible to customize how the system waters the area depending on the dimensions and dimensions of the lawn. They cover a good distance and provide optimum coverage.

2. Fountain Spray Sprinklers

Fountain spray sprinklers are small ring-shaped or wedge-shaped sprinklers that are used for spot watering. This is helpful if you have to water deeply a new patch of lawn or a newly planted tree. The sprinkler system works just like a fountain. It quickly waters small spaces quite well.

3. Oscillating Sprinklers

Oscillating sprinklers are the classic type of sprinklers. It provides an arc of water that tilts back and forth. While they can water the entire lawn, you might have to keep moving it for the best coverage. Kids love playing with these sprinklers.

How to Repair Sprinkler Systems

It’s quite easy to fix the simple problems with your irrigation system if you know how. The common breakdowns of simple systems mostly need easy fixes. Repairing sprinkler systems as soon as they’re broken is necessary because only by doing so you’ll save a lot on your water bills.

1. Replace the heads.

If your sprinkler system is not working, there could be a problem with the sprinkler head. You simply have to replace it if it is broken. To do that, dig down the soil and find the sprinkler head to expose the riser. Just unscrew the broken one and install a new set.

2. Clean and reset heads.

Sometimes, the head isn’t broken but only to dirty to function well. If this is the case, simple cleaning would do. Unscrew the head and rinse away all debris and soil from it using water. Be sure that no dirt is clogging up the head.

3. Check the valves.

If your sprinkler system is barely shooting water, then it is most likely caused by low water pressure. Check the valves and make sure that they are fully open. If they are and there still no water coming out of the system, schedule a sprinkler repair Conroe TX so that the experts can get to the bottom of the problem.